Technical Data Sheet Iron TC Type J - Standard
| CALIFORNIA FINE WIRE | Electrical | CALIFORNIA FINE WIRE | |
| Specific Resistance (O-CM/F) | 75 | ||
| Specific Resistivity(µO-cm²/cm) | 12.48 | ||
| Commercial Resistance Tolerance (On Sizes below .020) | 3.00% | ||
| Commercial Resistance Tolerance (On Sizes above .020) | 5.00% | ||
| Temperature Coefficient of Resistance (ohms/ohm/Deg. C {0 to 100°C}) | .002700 | ||
| Thermal EMF vs Copper | +.012 | ||
| CALIFORNIA FINE WIRE | Physical | CALIFORNIA FINE WIRE | |
| Density (gm/cm³ ) | 7.87 | Tensile Strength: | |
| Density(lbs/in³) | 0.284 | UTS Hard: | 120,000 |
| Youngs Modulus (* 106 PSI) |
| UTS Stress Relieved: | 100,000 |
| UTS Annealed: | 50,000 | ||
| Specific Heat at 20 Deg C (cals./gm) | 0.113 | YTS Tensile - Hard: |
|
| YTS Tensile - Stress Relieved: |
| ||
| Thermal Conductivity (watts/cm/Deg. C) | 0.739 | YTS Tensile - Annealed: |
|
| Note: All values may vary dependant on specific design and usage | |||
| Coefficient of Linear Expansion (X 10-6 in/in Deg. C) Deg. C | 6.9 | ||
| Melting Point C | 1496 | ||
| Melting Point °F | 2725 | ||
| CALIFORNIA FINE WIRE | Miscellaneous | CALIFORNIA FINE WIRE | ||
| Magnetic | Strong | |||
| Operating Temp C | 371 | Composition | ||
| Operating Temp °F | 700 | Iron | 99+ | |
| Specifications: |
|
| ||
| ASTM-E-230 |
|
| ||
|
|
|
| ||
|
|
|
| ||
| Capabilities | VISIT US ON THE INTERNET
http://www.calfinewire.com | |||
| Wire | YES | |||
| Ribbon | YES | |||
| Square | YES | |||
| Insulated | YES | |||
| Plated | YES | |||